$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 12)
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 12)
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05)
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05)
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5)
00:1f.0 ISA bridge [0601]: Intel Corporation HM55 Chipset LPC Interface Controller [8086:3b09] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
02:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470] [1002:68e0]
02:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series] [1002:aa68]
03:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692] (rev 01)
05:00.0 Network controller [0280]: Qualcomm Atheros AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
ff:02.1 Host bridge [0600]: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0 [8086:2d11] (rev 02)
ff:02.2 Host bridge [0600]: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved [8086:2d12] (rev 02)
ff:02.3 Host bridge [0600]: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved [8086:2d13] (rev 02)
Installer les firmwares Radeon.
Ordi récupéré. Il chauffe trop et déclenche la procédure d’extinction par ACPI si on fait trop travailler le CPU. Faudrait vérifier l’état de la pâte thermique, mais en attendant…
radeon-pci-0200
Adapter: PCI adapter
temp1: +80.5°C (crit = +120.0°C, hyst = +90.0°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +104.0°C (crit = +102.0°C)
temp2: +49.0°C (crit = +96.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +92.0°C (high = +95.0°C, crit = +105.0°C)
Core 2: +92.0°C (high = +95.0°C, crit = +105.0°C)
BAT0-acpi-0
Adapter: ACPI interface
in0: 11.68 V
curr1: 0.00 A
Après avoir ajouté thermal.crt=-1 en paramètre de boot, la température critique de acpitz-acpi-0 n’est plus prise en compte. Normalement, 104° Max.
$ sensors
radeon-pci-0200
Adapter: PCI adapter
temp1: +68.0°C (crit = +120.0°C, hyst = +90.0°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +104.0°C
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +62.0°C (high = +95.0°C, crit = +105.0°C)
Core 2: +63.0°C (high = +95.0°C, crit = +105.0°C)
BAT0-acpi-0
Adapter: ACPI interface
in0: 11.76 V
curr1: 0.00 A
La touche flechée ‘haut’ est endommagée, ainsi que d’autres touches voisines.
On pourrait utiliser le keypad, mais il a des comportements relous en fonction
des applications. KP_Up n’était pas égal à Up.
On édite /usr/share/X11/xkb/symbols/keypad, et je remplace la touche ‘1’ avec
‘Up’ au lieu de KP_End. Ça marche après redémarrage de Xorg ! => setxkbmap fr pourrait suffire. Penser à changer aussi la section “ossnumber” si on utilise ce layout.
Ordinateurs : Acer Aspire 5740, ASUS N3150 ITX, Compaq Presario CQ62, Dell E5530, Dell Optiplex 3020, HP Laptop 17-cp0268nf, hp notebook 14-bp029nf, HP pavilion chromebook 14 "butterfly", HP Probook 450 G3, iBook G4, iMac 10.1 (EMC 2309), intel_NUC5CPYH, KS-UMPC102VD, Lenovo Thinkpad T510, Lenovo Thinkpad T60, Macbook Pro 2013, Sony VAIO PCG-71511M, Sony VAIO SVS1311D4E, Sony VGN NS12M, Toshiba Qosmio G50-127, Toshiba Satellite, Toshiba Tecra T9000